The finest range of Hydraulic swing beam shearing machine made available by us in the market, is amongst the finest that are available in the market. The product’s performance, service life and capacity, is owed to the finest raw materials and modern machines, applied in its making. Further, the offered range is marked at the most reasonable rate possible.
Quick Details
Condition: New
Voltage: 380V/50HZ/3
Rated Power: 7.5kw
Dimension(L*W*H): 3800x1850x1750mm
Weight: 7000kg
Certification: ISO9001:2008
Warranty: 2 years
Shearing thickness: 8mm
Shearing width: 3200mm
Back Gauge: Automatic
Cutting material: Metal Stainless Steel Carbon Steel Aluminum
Cutting angle: 1.5 degree
CNC system: E21, E200, E300
After-sales Service Provided: Overseas service center available
Hydraulic Guillotine Shearing Machine Introduction
- This machine is suitable for cutting the plate which is of the thickness of 1-8mm, width≤ 2500/3200/4000 mm.
- The tensile strength of sheets is 450N/mm2 . If the plate to be sheared is of other strength , the cutting thickness should be changed.
- This machine adopts plate – welded construction , hydraulic driving, nitrogen return stroke, The machine is of steadiness, and good rigidity.
- It is fast and convenient to adjust the blade clearance .It has front and back gauge. Back gauge adopts mechanical driving revolution set to show numerical value . And it has manually operated to adjust . Front gauge adopts ruler counter and gauge orientation .It also has the installation for light beam shadow over lapping the drawn line on the plate. It is convenient to draw the line and shearing narrow plate. It is convenient to draw the line and shear. Stroke steeples controller raises working efficiency in shearing narrow plate. The machine is equipped with the protection frame.
- While the frame opened, The machine will stop working automatically to ensure the safety of operating.
Main features of the hydraulic shearing machine
- Standard with ESTUN E21S, with motor control X axis. Shearing times and shearing stroke are controlled by NC system automatically. Backgauge is driven by general A/C motor, or frequency inverter
- The frame is welded construction with steel plate, vibration to eliminate stress, with sufficient rigidity and high strength, steady & reliable performance, easy operation and maintenance.
- Hydraulic drive, swing beam, the return of the knife beam is smooth and prompt by the accumulator or nitrogen cylinder. The stroke of knife beam can be adjusted steplessly.
- The back gauge is motorized adjustable and manual fine adjusted.
- Adjusting of the gap between blades is portable and quick. The value of the gap is indicated on a dial.
- High performance hydraulic shearing machine.
- Holistic welding structure.
- Front support arms and standard protective guard.
- A set of standard blade.
- Protective fence and the safety interlocker to ensure the operation safety.
- Equipped with lighting-alignment(shadow light) device.
- Protective fence and the safety interlocker to ensure the operation safety.
Technical parameters
Detailed Images
- Brand: Schneider
- Original: France
- French schneider electrical equipment to ensure the stability of the machine,safe and reliable, strong anti-interference ability
- Electric cabinet with function of opening door to cut off power.
- Brand: SIEMENS
- Original: Germany
- Guarantee the service life of the machine, reduce working noise, and save energy.
- Brand: Sunny
- Original: United States
- The world famous hydraulic pump brand in the United States performs well and provides more power to the entire hydraulic system. It can support the machine to work continuously for more than 13 hours.
- Brand: BOSCH Rexroth
- Original: Germany
- Reduce the complexity and cost of maintenance and repair.
- Resource allocation, greater efficiency, personalization and higher profitability.
- Germany EMB Tube
- Using Garmon EMB tube and connectors reduces the odds against welding siag jaming the valves and affect oil flowing
- Brand: Hiwin
- Original: Taiwan
- High precision Backgauge with fine ball screw and rail linear
- The Backgauge features a horizontally mounted housing structure with high stability, single-shell dual-rail, high precision, X-axis drive and automatic CNC system.
Open Door Power Off
Front safegurad rail adopts opening door cut off power, ensuring the operational safety
High-quality Alloy Tool Steel
Made by high-quality alloy tool steel, the machine can meet the impacting load and high wear resistance requirem
Built-in Spring Pressure Cylinder
Built-in spring pressure cylinder, its lower end equipped with special material gasket, separately control the pressure, avoiding aluminium alloy or other softer materials being imprinted
This design makes the cutting machine’s upper knife rest guide rail surface, when installing the knife side is in the open processing environment, thus achieving the goal of reducing the production cost and improving the manufacturing economy.
Rapid adjustment mechanism for rearranging blade clearance, easy operation by hand, realizing stepless adjustment of blade clearance.
Optional protection device
Front Photoelectricity Protection
Back Photoelectricity Protection
Pneumatic Back Supporter
Front Feeding Table
Optional system configuration
E21S
- Hd LCD, Chinese/English
- Rear baffle control and intelligent positioning
- Control ordinary motor or frequency converter
- dual programmable digital output, workpiece count
- 40 program storage, each program 25 steps
- unilateral positioning, compromise function
- One-key backup and recovery of parameters
TP07
- High-definition TFT true color touch screen
- Servo control is adopted for the rear material
- Automatic calculation of various shearing schemes of different plates
- Automatic stop correction function of rear stop
- Quick one-step cutting function
- Store multi-step cutting sequence and products
- soft limit function, power off memory, support multiple languages
DAC310
- High-definition LCD display is 275×48 pixels
- servo control/frequency conversion speed control/two-speed ac motor control
- Automatic positioning and retreat of the electric rear baffle
- multi-program automatic operation, program and program step link
- Cutting count, cutting range limit, power off memory, and English/English conversion
- 1,one-page parameter fast programming
- 2, navigation shortcuts
- 3, 7″ widescreen color TFT
- 4, the maximum 4-axis control (Y1.Y2 and two additional axes)
- 5, workbench deflection compensation control
- 6, mold / material / product library
- 7, USB peripheral interface
- 8, advanced Y-axis control algorithm, can control both closed loop and open loop valve
- 9, panel-type installation structure, optional suspension box
